*A1*15*T2*C
Fish

*3*T1*L
Guide the fish from the top left hand
corner of the screen to its "home" in 
the bottom right hand corner. If you 
try to move the fish into an area in 
which there is already an obstacle the 
fish will remain where it is.

You can use the arrow keys or the 
mouse. If you use the mouse the 
pointer must be in a square next to
where the fish is.

There are four levels of difficulty. 
***
*A2*15*T2*C
Net
*3*T1*L

Guide a fish around the net until you 
can get the fish back to its home. If 
you try to move the fish through a 
part of the net in which there aren't 
any gaps the fish will remain where 
it is.

You can use the arrow keys or the 
mouse. If you use the mouse the 
pointer must be in a square next to
where the fish is.
***
*A3*15*T2*C
Faces

*3*T1*L
Point to the face that is the odd one
out. Use the mouse or the arrow keys.

Underneath, the small coloured faces 
indicate how many goes it takes to get 
it right. 

Green face  -  first time right
Yellow face -  second time right
Red face    -  third time right
Grey face   -  three wrong attempts 

There are four levels of difficulty. 
***
*A4*15*T2*C
Houses

*3*T1*L
Point to the house that is the same as 
the house on the left. Use the mouse
or the arrow keys.

Underneath, the small coloured houses 
indicate how many goes it takes to get 
it right.

Green house  -  first time right
Yellow house -  second time right
Red house    -  third time right
Grey house   -  3 wrong attempts 

There are four levels of difficulty. 
***
*A5*15*T1*C
Printing

*15*T1*C
Printer setup

*15*T1*C
Printer

*3*T1*L
This option allows you to change the 
current printer driver. Select from 
the list of available drivers, the 
one that matches your printer.

*15*T1*C
Orientation

*3*T1*L
Select the orientation which you 
require for the print out, either 
landscape or portrait.

**
*15*T1*C
Printing- continued (p2)

*15*T1*C
Intensity

*3*T1*L
Select the intensity of the print
out you require. Choose either full
or half.

*15*T1*C
Print out size

*3*T1*L
Print outs can be full size or half
size. The size selected is indicated
by the small picture to the left of
this option.
**
*15*T1*C
Printing- continued (p3)

*15*T1*C
Printer port

*3*T1*L
Printing can be routed through one of
a number of ports at the rear of the
computer.

*15*T1*C
LPT1 - for parallel printing

COM1 - for serial printing  
from communications port 1  

COM2 - for serial printing  
from communications port 2  
(if fitted to the computer) 
**
*15*C*T1
Printing- continued (p4)

*15*T1*C
To start printing

*3*T1*L
Printing can be started AT ANY TIME
from within the program by holding 
downthe Ctrl key and then pressing
the letter P. The present screen will
then be sent to the printer.

Printing can be halted by pressing the
ESCAPE key at any time. If printing is 
interrupted in this way there may be 
some time to wait before printing
stops and control is returned to the
program.
****
